Paint Coating Blog
Things to Consider While Preparing for Industrial Paint and Coatings
When it comes to application of paint on ferrous and non-ferrous surfaces, industrial paints are designed to provide a better and effective option. Whether you are using these paints and coatings on iron, steel, or aluminum, they need to be modified in a way that they provide a better finish on that particular material. As a painter, you need to be knowledgeable in the method needed for the painting procedure to improve your chances of an effective finish.
Steel is one of the easiest materials to paint. However, for you to get a smooth finish, you need to eliminate the rust, grease, and debris that could cause unevenness on the surface. Since you need to surface to be bare steel, you have to use sandblasting, hand power tools, and solvent degreasing. No matter the tool that you intend to use, make sure that it works perfectly to get rid of all the impurities from the metal leaving it clean, smooth, and ready for a fresh coat of paint.
Aluminum is one of the hardest metals to prepare for industrial painting. Practice extra care when removing paint or impurities from aluminum in order to get a smooth surface. For you to get a smooth finish, you need to apply paint carefully on the surface and allow it to reach the fissures that were developed during the painting process. Spread the paint evenly and let it settle on the surface for a smooth finish and a desirable look and feel. To learn more about painting coating, visit http://www.encyclopedia.com/literature-and-arts/art-and-architecture/art-general/painting.
Plastics and acrylics too can be painted using these industrial paints -simply note that they respond differently to these products. Solvents used in these kind of products tend to vary hence the huge difference. In these materials, it is often advisable to use water-reducible coatings in order to stop damage occurring. Some bright paints normally have pigments with a poor hiding nature hence tend to show their semi-transparent properties of the acrylics. Such a situation calls for a thick coat of primer to provide better adhesion and even virtually eliminate the filtered light that might come through the acrylic surface. Know more about CERAMIC PRO.
You have to begin with a test spot whenever you are painting a certain product or material using industrial paints. This spot needs to be prepared just like the entire material that is due to be painted. Working on the test spot will give you an idea of the kind of paint that will work best. Not only will you know the effectiveness of some paints, but you'll also know whether or not it is compatible with the product that you are painting. Check out Opti-Coat Pro for more info.